JoomlaWatch 1.2.12 - Joomla Monitor and Live Stats by Matej Koval

Solar Terrestrial Data Module created by
PA4RM

Solar X-rays:
Status
Geomagnetic field:
Status
D-Region Absorption
Prediction:
Status
Radio Propagations Module created by
PA4RM

Hamradio

First 23cm QSO

Skriv ut

Hamradio - Generelt

mandag 16. mai 2011 21:24 Skrevet av Eivind W. Aavik

Today i made my first qso on 23cm. The setup in my end, TS2000 connected to 1296MMT transverter putting 2 smal watts inn to a 23cm biquad antenna, the antenna was sitting in the basement window pointing towards LA3EQ in JO28xj 76km away. QSO was carried out on the mode jt6m. I heard la3eq realy good when we got the antennas lined up… but he did not hear me. After a while 3eq figured out the problem (bad solder in preamp) and then we were able to hear itch other and I got my first qso ever above the 70cm band.

13cm and 23cm antenna

Skriv ut

Hamradio - Generelt

fredag 13. mai 2011 11:40 Skrevet av Eivind W. Aavik

13cm_og_23cm-antenne

I’ve been industrious in the shack, making my self some antennas. First up was a 13cm and later I made a 23cm. The Copper sheets I got from the local tinman, and he cut them to my needs, the piping I found in my clutter box.

Les mer …

Mine Diplomer

Skriv ut

Awards

tirsdag 11. mai 2010 21:07 Skrevet av Eivind W. Aavik

Diplomjakt

Radioamatørene bekrefter forbindelser med andre stasjoner ved utveksling av skriftlige rapporter, QSL-kort. Disse kortene danner grunnlaget for å søke om forskjellige diplomer som f.eks. gis for forbindelser med et bestemt antall radioamatører innen en bestemt tidsramme. Det kan ligge flere års innsats bak et ettertraktet diplom når det endelig henger på veggen!

 

ISCAT and Logbook of the world, LOTW

Skriv ut

Hamradio - Generelt

fredag 05. november 2010 14:01 Skrevet av Eivind W. Aavik

How do I get ISCAT mode to be accepted by LOTW ?

This question is common and the same problem as we had whit the mode JT6M

First get your log program to accept ISCAT, in hamradio deluxe open logbook, and from the Tools menu choose Configure, and then mode its self explained

Then you need to open the LOTW software TQSL. From the file menu choose preference. The dialog box will appear, and from the tab ADIF modes you make a new entery. ISCAT and from the list you choose DATA. The result shod bee:

ScreenHunter_01 Nov. 05 13.55

Your all don, upload your log to LOTW and wait for others to upload :-D

73 all

DXCC Cuba bekreftet med papir qsl

Skriv ut

Hamradio - Generelt

fredag 01. oktober 2010 13:19 Skrevet av Eivind W. Aavik

qsl-co2wl Endelig fikk jeg papir qsl kort fra cuba, 1 oktober 2010 dagen hummer fisket begynner, kom kortet fra CO2WL. QSO’n hadde vi 27-04 2010 18:12 PSK31. Jeg har lenge hatt Cuba bekreftet via LOTW men manglet papir kortet fra dette landet.

Flere artikler …